Flex Paillettes Heat Transfer - Silver

25cm wide, sold per meter, for cotton and polyester.

This HT is a crystal iridescent layer with a RAINBOW EFFECT
Press 150 degrees for 15 seconds. Remove liner when warm. Wash @ max 40 degrees. 1.5cm minimum cut. 45 degree blade.

Specifications:

- Thickness: 100microns
- Matt finish
- Has adhesive liner
- For cotton - polyester blends
- Iron on at 150C for 15 seconds at medium pressure
- Remove liner when warm
- Maximum washing temperature at 40C
- Can overlap ontop of other heat transfer*

*only overlap on products that specify it is possible. Refer to example below:

-Please note that before cutting the material, you must run the load of the worksheet by following the procedure of the cutter: MENU/LOADING and enter the correct size.

-Before cutting the material, ensure that you select MIRROR image of your design.

-During the FILM PEELING phase, remove the material in excess by the hand resting on the support and apply gentle pressure towards the outside.

-During the APPLICATION phase, after having the material pressed, we suggest to remove the support and to press the material again for another 5 or 10 seconds, covering it with silicon paper, in order to assure a greater resistance to washing.

Flex Classic is a heat transfer film with a matte and thin soft-touch finish. It works on cotton, poly-blends, polyester and acrylic. Best choice for lettering on T-shirt, sport & leisurewear, sports bags and promotional articles.

The sticky liner allows for precise cutting, fast weeding and positioning even on fine lettering. Ranked the best alternative to silkscreen printing for small lettering.

Washable at 80 Degrees Celsius without fading. Suitable for dry cleaning. The perfect solution for imprinted athletic and branded apparel.

The variety of colors in the Flex Classic product range opens the door to endless design possibilities. While many different films can be heat pressed on top of one another, you should follow the few simple rules listed below for trouble-free applications.
You can overlay any flex Classic with any other flex film. When overlaying multiple layers of film, heat press each layer for 4 sec except the last layer which you should press for 12 sec.
Limit the total number of layers of heat transfer films to four films.

Press 150 degrees for 15 seconds. Remove liner when warm. Wash @ max 40 degrees. 1.5cm minimum cut. 45 degree blade.